FFConfigLite

Diagnose and configure Ford Focus 2 and C-Max I modules with ease.

Connect your Ford Focus 2 or C-Max using an ELM327 or ELS27 interface to access and manage various CAN-bus modules:

Engine Control Module (ECM): Access module information, read and clear diagnostic trouble codes (DTCs), reboot the module, and reset the long-term fuel trim (KAM)* for the following engine types:

• ESU-411/418 (1.8 125/2.0 145 hp)
• SIM28/29 (1.4 80/1.6 100/115 hp)
• ESU-121/131 (1.8 120/2.0 145 hp)

Instrument Cluster (Dashboard): Access module information, read and clear DTCs, configure settings, reboot the module, and adjust or correct the odometer mileage*.

Brake Control Module (BCM): Access module information, read and clear DTCs, configure settings, reboot the module, reset Dynamic Damper System (DDS) calibration, and perform brake bleeding*.

Central Convenience Module (CCM): Access module information, read and clear DTCs, configure settings*, and reboot the module.

Body Control Module (BCM) / Restraint Control Module (RCM): Access module information, read and clear DTCs, configure settings, reboot the module, and clear crash data*.

Transmission Control Module (TCM): Access module information, read and clear DTCs, and reset KAM*.

Climate Control Module (CCM): Access module information, read and clear DTCs.

Audio Control Module: Access module information, read and clear DTCs, and retrieve the radio code (for M-series)*.

*Some features require the full version of the software.

For full functionality and access to additional modules, consider modifying your ELM327 adapter. Instructions can be found here: Http://forffclub.narod.ru/index/0-2

ELS27 adapters can be purchased at: https://els27.ru/. Configure the baud rate for ELS27USB to 38400 and for ELS27BT to 2,000,000 using the ELS27 Baudrate utility.